Diamond Ring Settings – Holding Those Gems Close

Basically, diamond ring settings are the mountings used to attach the diamonds on the ring’s band. When you are choosing a diamond ring, the types of setting need not concern you too much as you can trust any competent jeweler to use an appropriate setting for the cut of the diamond. Although if you are choosing a princess cut diamond or any cut with points or corners you should just check that the setting protects the corners to prevent any damage to the stones.

You may however, have a preference for the metal used for the setting. It is normal to use white metal for diamond ring settings, even if the band itself is yellow gold, typically white gold or platinum is used for the setting. This is to better show off the clarity of the diamond, and a clever jeweler can even make the setting in such a way as to make the diamond appear larger than it actually is.

By far, the most efficient way to tell which type of diamond ring you prefer is to try on various ring styles. In that regard, it is really ideal that you bring your fiancée to the store with you so you’d know which ring will best complement her finger. If this is not possible because you are buying the ring as a surprise, then it could be a good idea to let her best friend, her mother or a sister in on the secret so they can advise you of the type of ring she might like best.

In most instances, unless you are having a ring custom made, you will not have a choice of the type of setting, and even if you do you should be guided in your selection by the jewelry designer. Some of the most often used popular ring settings available include the following.

Bar setting

Rings carrying this kind of setting variation use prongs that are fused into elongated bars, which primarily function to hold the stones in place. Rings with bar settings offer an attractive way of showcasing the ring’s metal construction and are suitable for multi-stone rings.

Prong setting

This type of setting is popularly used in solitaire rings. With a prong setup, the diamond is enclosed in a separate metal casing that is secured by three or more prong or claw supports. This classic design makes the ring’s centerpiece look as if it is suspended and with a cutaway gallery allows the light to shine through the stone. This setting is normally used to set the diamond as a way to best display its clarity and brilliance.

Bezel Setting

This setting is commonly found with emerald rings, as emeralds are much softer and more delicate than diamonds. As a result they are easily damaged and chipped if not given some extra protection. A bezel setting is like a metal collar that surrounds the entire edge of the gemstone, and its use has been extended to other precious gem rings.

Aside from these types of diamond ring settings, there are still other variations available. If you would like to know more about them, you could do some online research before deciding which diamond ring to purchase. However, the choice of diamond ring you make is unlikely to be based on the type of setting. In fact, the less obvious the setting the better, as its only purpose is to hold the diamond securely whilst being as inconspicuous as possible to allow the stone to be the star of the piece as it should be.

Related Post

Silver Jewelry And Other Great Jewelry Gift Ideas The desire for attractive silver jewelry carries on and one increasingly popular item is silver earrings. A specific thing you might not know about st...
Designer Rings – Stand Out From The Crowd Designer rings have never been more popular and the trend is becoming more evident as women turn out to be more fashion conscious. This trend has been...